Snow Brand BeanStark Purifan S 1000ml 1000ml

Product Name: Purifan S
Content Volume: 1000mL Features: ○ Soaking with sodium hypochlorite cleans baby bottles and nipples.
○ The residual sterilizing solution left in baby bottles is below tap water standards, so it has no effect on the baby’s body.
○ By diluting Purifan S 80 times and soaking thoroughly washed baby bottles and nipples for over an hour, you can clean them hygienically for feeding.
○ You can leave them soaked until just before feeding, and prepare milk without rinsing, so the baby doesn’t have to wait and milk can be made quickly.
○ It can also clean tableware used for baby food (ceramic, glass, resin, wooden items). (Do not use for metal items.)
○ This is a food additive (sterilizing agent).
How to Use: Baby tableware, baby bottles, nipples After washing and rinsing, soak for over 1 hour. If there is concern about odor, rinse with tap water. - Add 12.5mL of this product to 1L of tap water. - Add 50mL of this product to 4L of tap water. Vegetables, fruits After washing and pre-rinsing, soak for 5 to 10 minutes. After use, rinse thoroughly. - Add 12.5mL of this product to 1L of tap water. - Add 50mL of this product to 4L of tap water. ※ Standard usage: add 12.5mL of this product to 1L of tap water (80 times dilution). ※ For baby bottles and nipples: use 80 times diluted solution. ・Measurement can be done using the cap: one full cap is about 20mL, the inner cap mark is 12.5mL. How to use for baby bottles and nipples: Soak in the 80 times diluted solution for more than 1 hour. Prepare a fresh 80 times diluted solution every 24 hours. Instructions: 1. Before soaking: wash After feeding, wash baby bottles with detergent and rinse thoroughly. Nipples should be massaged and washed, especially the tip which clogs easily, using a specialized tool to remove milk residue, then rinse well. 2. Prepare sterilizing solution Dilute this product 80 times with tap water (for 4L, add 50mL = 2.5 capfuls). 3. Soak Completely submerge well-washed baby bottles and nipples without leaving air inside, and soak for more than 1 hour. 4. Take out and prepare milk Before feeding, take out baby bottles and nipples with clean hands or dedicated tongs. Shake well to remove sterilizing solution from recesses (rinsing is not necessary). If odor is a concern, rinse with tap water. About nipples: usable for both yellow (isoprene rubber) and transparent (silicone rubber) types. Precautions for Use: Be sure to read the product label before use. Use according to instructions (avoid using undiluted or mixing with hot water or other chemicals). Avoid contact with eyes. If it gets into eyes, do not rub; immediately rinse with water or lukewarm water for at least 15 minutes. If accidentally ingested, do not induce vomiting; rinse mouth immediately and give 1-2 glasses of milk or water, then consult a doctor. 【During or after use, note the following】 If the liquid contacts skin, wash with water. If symptoms such as rough skin, rash, redness, or itching appear, discontinue use and consult a doctor or pharmacist. 【Storage and Handling Precautions】 - Keep out of reach of children. - Store tightly sealed in a cool place away from direct sunlight. - Do not mix with dedicated detergents, cleaning agents for baby bottles, or disinfectants for baby bottles and nipples — this is dangerous. - Do not transfer to other containers to prevent misuse or quality changes. - Do not use metal containers or utensils (e.g., spoons) as they may deteriorate. - Be careful as it may cause discoloration or fading if it contacts clothing. - This product is a sterilizing agent for baby tableware and vegetables/fruits. Depending on the product used, printed surfaces or materials may discolor or deteriorate. Ingredients: Sodium hypochlorite 1.0%, Water 99.0% 【Do Not Mix】 Mixing with acidic detergents, bleach, or cyanuric acid-based products produces chlorine gas and is dangerous. Muragen Co., Ltd. 019-623-1211 ※ Package design and other details may change without notice. Thank you for your understanding.