アースケミカル 日本製シンク排水口用泡クリーナー、洗面台排水ホース用、200ml

Please use it after shaking well

• Remove the drain tap from the drain before use.

before use

• Shake the can up and down well 10 times.

• Turn the special nozzle in the “OPEN” direction to release the lock.

  * Do not look into the injection port at this time.

• Cover the drain of the washbasin with a special nozzle.
• Press the can so that it is perpendicular to the drain.

• Haste cleaning

  Mach foam is jetted, and the dirt and clogging are washed away.
• Stop jetting with the guideline of the amount of use that bubbles come out of the overflow hole (about 3-7 seconds).

• Soaking and sanitizing

  If you want to thoroughly wash, deodorize, and disinfect bacteria, leave it for about 30 minutes without running water.
• Lift the special nozzle upward and turn it in the “LOCK” direction to lock it.

Bubbles may not come out depending on the structure of the drain pipe, but the jetting standard is about 3 to 7 seconds.
After cleaning, wash off any foam remaining on the sink with water.

[Estimated usage]

About 3 to 7 seconds per time (about 30 seconds when one can is injected in full)
If the dirt or clogging is severe, adjust the amount again after a while and use more.

Do not use the can upright or sideways.